DevJourney · code I wrote while learning
Periodic_Capture.ino
3.4 KB#include "esp_camera.h"
#include "FS.h"
#include "SD.h"
#include "time.h"
#include <WiFi.h>
const char *ssid = "Solace";
const char *password = "damnbrodamn";
const char *ntpServer = "pool.ntp.org";
const long gmtOffset_sec = 19800;
const int daylightOffset_sec = 0;
#define SD_CS_PIN 13
#define CAPTURE_INTERVAL_SEC 5
#define PWDN_GPIO_NUM -1
#define RESET_GPIO_NUM -1
#define XCLK_GPIO_NUM 0
#define SIOD_GPIO_NUM 26
#define SIOC_GPIO_NUM 27
#define Y9_GPIO_NUM 35
#define Y8_GPIO_NUM 34
#define Y7_GPIO_NUM 39
#define Y6_GPIO_NUM 36
#define Y5_GPIO_NUM 21
#define Y4_GPIO_NUM 19
#define Y3_GPIO_NUM 18
#define Y2_GPIO_NUM 5
#define VSYNC_GPIO_NUM 25
#define HREF_GPIO_NUM 23
#define PCLK_GPIO_NUM 22
void connectWiFi()
{
WiFi.begin(ssid, password);
Serial.print("Connecting to WiFi");
while (WiFi.status() != WL_CONNECTED)
{
delay(500);
Serial.print(".");
}
Serial.println("\nWiFi connected");
}
void startCamera()
{
camera_config_t config;
config.ledc_channel = LEDC_CHANNEL_0;
config.ledc_timer = LEDC_TIMER_0;
config.pin_d0 = Y2_GPIO_NUM;
config.pin_d1 = Y3_GPIO_NUM;
config.pin_d2 = Y4_GPIO_NUM;
config.pin_d3 = Y5_GPIO_NUM;
config.pin_d4 = Y6_GPIO_NUM;
config.pin_d5 = Y7_GPIO_NUM;
config.pin_d6 = Y8_GPIO_NUM;
config.pin_d7 = Y9_GPIO_NUM;
config.pin_xclk = XCLK_GPIO_NUM;
config.pin_pclk = PCLK_GPIO_NUM;
config.pin_vsync = VSYNC_GPIO_NUM;
config.pin_href = HREF_GPIO_NUM;
config.pin_sccb_sda = SIOD_GPIO_NUM;
config.pin_sccb_scl = SIOC_GPIO_NUM;
config.pin_pwdn = PWDN_GPIO_NUM;
config.pin_reset = RESET_GPIO_NUM;
config.xclk_freq_hz = 20000000;
config.pixel_format = PIXFORMAT_JPEG;
if (psramFound())
{
config.frame_size = FRAMESIZE_UXGA;
config.jpeg_quality = 10;
config.fb_count = 2;
}
else
{
config.frame_size = FRAMESIZE_SVGA;
config.jpeg_quality = 12;
config.fb_count = 1;
}
esp_err_t err = esp_camera_init(&config);
if (err != ESP_OK)
{
Serial.printf("Camera init failed with error 0x%x", err);
return;
}
}
void startSDCard()
{
if (!SD.begin(SD_CS_PIN))
{
Serial.println("SD Card mount failed");
return;
}
uint8_t cardType = SD.cardType();
if (cardType == CARD_NONE)
{
Serial.println("No SD card attached");
return;
}
Serial.println("SD Card initialized");
}
String getTimestampFilename()
{
struct tm timeinfo;
if (!getLocalTime(&timeinfo))
{
return "/img_unknown.jpg";
}
char filename[64];
strftime(filename, sizeof(filename), "/img_%Y%m%d_%H%M%S.jpg", &timeinfo);
return String(filename);
}
void setup()
{
Serial.begin(115200);
delay(1000);
connectWiFi();
configTime(gmtOffset_sec, daylightOffset_sec, ntpServer);
Serial.print("Waiting for NTP time");
while (!getLocalTime(nullptr))
{
delay(500);
Serial.print(".");
}
Serial.println("\nTime synchronized");
startCamera();
startSDCard();
}
void loop()
{
camera_fb_t *fb = esp_camera_fb_get();
if (!fb)
{
Serial.println("Camera capture failed");
delay(CAPTURE_INTERVAL_SEC * 1000);
return;
}
String path = getTimestampFilename();
File file = SD.open(path, FILE_WRITE);
if (!file)
{
Serial.println("Failed to open file for writing");
}
else
{
file.write(fb->buf, fb->len);
Serial.printf("Saved: %s (%u bytes)\n", path.c_str(), fb->len);
}
file.close();
esp_camera_fb_return(fb);
delay(CAPTURE_INTERVAL_SEC * 1000);
}