DevJourney · code I wrote while learning
Room_Light_Data.ino
2.5 KB#include <WiFi.h>
const char *ssid = "Upayan";
const char *password = "iloveesp";
const int ldrPin = 34;
int maxLightLevel = 0;
int minLightLevel = 4095;
void setup()
{
Serial.begin(115200);
delay(100);
Serial.println("\n--- ESP32 Light Monitoring System ---");
Serial.println("Initializing...");
pinMode(ldrPin, INPUT_PULLUP);
Serial.println("Scanning for available WiFi networks...");
int n = WiFi.scanNetworks();
Serial.printf("Found %d networks:\n", n);
bool ssidFound = false;
for (int i = 0; i < n; i++)
{
String foundSSID = WiFi.SSID(i);
Serial.printf(" - Network: %s, Signal Strength: %d dBm\n", foundSSID.c_str(), WiFi.RSSI(i));
if (foundSSID == ssid)
{
ssidFound = true;
Serial.printf("Network '%s' is within reach. Attempting to connect...\n", ssid);
break;
}
}
if (ssidFound)
{
WiFi.begin(ssid, password);
int attemptCount = 0;
while (WiFi.status() != WL_CONNECTED)
{
delay(500);
Serial.print(".");
attemptCount++;
if (attemptCount % 10 == 0)
{
Serial.printf("\nStill trying to connect (attempt %d)...\n", attemptCount / 2);
}
}
Serial.println("\nConnected to WiFi!");
Serial.printf("Network: %s\n", ssid);
Serial.printf("IP Address: %s\n", WiFi.localIP().toString().c_str());
}
else
{
Serial.printf("Network '%s' not found. Unable to connect.\n", ssid);
}
Serial.println("Setup complete. Beginning light level monitoring...\n");
}
void loop()
{
int lightLevel = analogRead(ldrPin);
if (lightLevel > maxLightLevel)
{
maxLightLevel = lightLevel;
}
if (lightLevel < minLightLevel)
{
minLightLevel = lightLevel;
}
static unsigned long lastLogTime = 0;
unsigned long currentMillis = millis();
if (currentMillis - lastLogTime >= 5000)
{
lastLogTime = currentMillis;
Serial.println("--- Light Level Reading ---");
Serial.printf("Raw Light Level Value: %d\n", lightLevel);
if (lightLevel < 500)
{
Serial.println("Status: Bright environment detected.");
}
else if (lightLevel < 2000)
{
Serial.println("Status: Normal lighting.");
}
else if (lightLevel < 3500)
{
Serial.println("Status: Dim lighting.");
}
else
{
Serial.println("Status: Dark environment detected.");
}
Serial.printf("Max Light Level: %d\n", maxLightLevel);
Serial.printf("Min Light Level: %d\n", minLightLevel);
Serial.printf("Timestamp: %lu ms since start\n", millis());
Serial.println("---------------------------");
}
}